STORZ & BICKEL Crafty+

Other manuals for STORZ & BICKEL Crafty+

Quick Start Manual2 pages

Questions and Answers

M
Mr. John Graham Jr.Aug 15, 2025
What to do if my STORZ & BICKEL Vaporizers CRAFTY+ cannot be switched on?
- J
  jennifer73Aug 15, 2025
  If your CRAFTY+ Vaporizer won't switch on, several factors could be the cause. First, ensure the battery is adequately charged. It might also be that the battery temperature is either too high or too low; in this case, allow the vaporizer to cool down or warm up. Also, make sure you connect the charger if the battery is empty or use the USB Cable supplied with the vaporizer. If none of these steps work, the vaporizer might be faulty.
M
michaelperryAug 18, 2025
Why is the LED display flashing alternately red/blue on my STORZ & BICKEL Crafty+?
- J
  James CruzAug 18, 2025
  If the LED display on your STORZ & BICKEL Vaporizer is flashing alternately red and blue, the following reasons may apply: Ensure the battery is charged, as this is a common cause. If the battery temperature is too high or too low, allow the device to cool down or warm up as needed. If the battery is empty, connect the charger. Also, verify that you are using the correct USB cable that came with your device. If problems persist, the vaporizer may be faulty.
R
Ronnie GilesAug 21, 2025
How to fix a STORZ & BICKEL Crafty+ when the LED display flashes blue?
- O
  oparkAug 21, 2025
  If the LED display is flashing blue on your STORZ & BICKEL Vaporizer, try the following: ensure the battery is charged. If the battery temperature is either too high or too low, allow the vaporizer to cool down or warm up. Connect the charger if the battery is empty. Verify that you are using the USB cable supplied with the vaporizer. If the issue persists, the vaporizer might be faulty.
J
John HowardAug 25, 2025
What to do if the LED display flashes alternately red/green on STORZ & BICKEL Crafty+?
- M
  Melinda GeorgeAug 26, 2025
  If the LED display on your STORZ & BICKEL Vaporizer flashes alternately red and green, here are a few things to check: Ensure the battery is charged. If the battery temperature is too high or too low, let the vaporizer cool down or warm up. If the battery is empty, connect the charger. Verify you're using the USB cable supplied with the device. If none of these steps resolve the issue, the vaporizer may be faulty.
J
Jacob BarberAug 28, 2025
What to do if my STORZ & BICKEL Vaporizers cannot be switched on?
- E
  Eric BakerAug 28, 2025
  If your STORZ & BICKEL Vaporizer won't switch on, ensure the battery is charged by connecting the Power Adapter or Car Charger. The battery temperature might also be too high or too low; let the Vaporizer cool down or warm up. Ensure you are using the supplied USB-C Cable. If problems persist, it may be faulty.
W
wernerdonnaSep 1, 2025
Why is the LED display flashing alternately red/orange on my STORZ & BICKEL Crafty+?
- M
  Makayla SparksSep 1, 2025
  If your STORZ & BICKEL Vaporizer's LED display is flashing alternately red and orange, consider these potential causes: ensure the battery is adequately charged. If the battery temperature is either too high or too low, allow the device to cool down or warm up. If the battery is empty, connect the charger. Also, verify that you are using the correct USB cable supplied with the vaporizer. If problems continue, the vaporizer itself might be faulty.
J
John HillSep 4, 2025
Why STORZ & BICKEL Vaporizers LED display flashes alternately red/blue?
- K
  Kimberly WallsSep 4, 2025
  If the LED display flashes alternately red and blue, it means the battery temperature is either too high or too low.
M
Marissa LambertSep 7, 2025
Why does STORZ & BICKEL Vaporizers LED display flash blue?
- R
  Rachel BrownSep 7, 2025
  If the LED display flashes blue, it means the battery is empty. Connect the Power Adapter or Car Charger to resolve this.
Y
ygonzalesSep 12, 2025
Why STORZ & BICKEL Vaporizers LED display flashes alternately red/green?
- R
  Richard SteeleSep 12, 2025
  If the LED display flashes alternately red and green, the USB cable is not suitable. Use the supplied USB cable.

Summary

1 PRODUCT OVERVIEW CRAFTY+

1.1 Scope of Delivery

Lists all included accessories and parts in the CRAFTY+ package.

1.2 Functional Elements

Identifies and labels the primary components and controls of the vaporizer.

1.3 Service

2 FOR YOUR SAFETY

2.3 Basic Rules

Establishes essential operating and safety guidelines for proper device use.

2.4 Safety Recommendations

Offers critical advice to prevent hazards and ensure safe operation of the vaporizer.

2.4.1 Risk of Injury due to electric Shock

Details precautions to avoid electrical hazards during use and charging.

2.4.2 Danger of Injury due to Burning;Vapors

Warns about potential burns from hot surfaces and risks of vapor inhalation.

2.4.3 Risk of Injury due to various Causes

Covers potential injuries from small parts, handling, or other unforeseen circumstances.

6 COMMISSIONING AND OPERATION

6.1 Unpacking

6.2 Power Connection

6.3 Charging the Battery

Details the process, indicators, and methods for charging the device's battery.

6.4 Filling the Filling Chamber

Step-by-step instructions on how to load the filling chamber with plant material.

6.5 Heating Up

Explains the procedure for activating and reaching the desired vaporization temperature.

6.6 Application

Provides a guide for inhaling vapor correctly after the device has reached temperature.

7 CLEANING

7.1 Cooling Unit

Details cleaning procedures for the cooling unit and its components.

7.1.2 Disassembling

7.1.3 Cleaning

Specific instructions for cleaning various parts, including precautions with cleaning agents.

7.1.4 Reassembling

7.3 Filling Chamber

8 STORZ & BICKEL APP

8.2 Connecting the Vaporizer with a Smartphone

8.4 Setting Temperature with the Storz & Bickel App

10 FAULTS

10.1 Possible Faults; Troubleshooting

Lists common issues, their causes, and recommended solutions.

10.2 In Case of Faults

13 WARRANTY, LIABILITY

13.1 Warranty

Outlines the terms, conditions, and procedures for asserting warranty claims.

STORZ & BICKEL Crafty+ Specifications

General

Temperature Range	40°C - 210°C (104°F - 410°F)
Bluetooth Connectivity	Yes
Heat-up Time	Approximately 60 seconds
Battery Type	Lithium-Ion
Warranty	2 years
Automatic Shut-Off	Yes
Heating System	Convection
Battery Life	60 minutes
Charging Time	About 2 hours
Weight	135 grams
Charging Method	USB
Bowl Capacity	0.25 grams