STORZ & BICKEL Volcano Hybrid Quick Start Manual

7. Inhale.
6. Pull Valve Balloon tight.
7. Put Valve Balloon on
Filling Chamber.
10. Turn off air pump.
13. Inhale.
12. Attach Mouthpiece to
Valve Balloon.
Do not overll!
6.
7.
1. Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap.
6. Put Tube on Filling Chamber.
This QUICK START MANUAL will guide you through the
main steps on how to use your new VOLCANO HYBRID
with the Tube or the Valve Balloon. For detailed
directions always refer to the included Instructions for
Use or contact us at info@storz-bickel.com.
Please clean the Mouthpieces before use.
BALLOON
TUBE
QUICK START MANUAL
1. Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap.
2. Screw on Filling Chamber.
3. Switch heat on.
4. Choose temperature.
5. Wait until set value is equal
to actual value (short acoustic
signal of the air pump).
Do not overll!
2. Screw on Filling Chamber.
3. Switch heat on.
4. Choose temperature.
5. Wait until set value is equal
to actual value (short acoustic
signal of the air pump).
9. Observe vapor density.
ok
8. Switch Air Pump on.
11. Remove full Balloon Unit.
3.
2.
2.
3.
2.
2.

STORZ & BICKEL Volcano Hybrid Specifications

General

Type	Desktop Vaporizer
Product Name	Volcano Hybrid
Category	Vaporizer
Heating Method	Convection and Conduction
Power Consumption	100W
Balloon System	Yes
Whip Hose	Yes
Connectivity	Bluetooth
App Control	Yes
Warranty	3 years
Temperature Range	40°C - 230°C (104°F - 446°F)
Compatibility	Dry herbs and concentrates
Power Supply	AC Power
Chamber Material	Aluminum
Features	digital display