Why is the operating panel of my strapex STB 75 not reacting?
- NnleblancSep 12, 2025
The operating panel might not be reacting because the button lock is switched on. See Section 4.6 to switch off the button lock.
Why is the operating panel of my strapex STB 75 not reacting?
The operating panel might not be reacting because the button lock is switched on. See Section 4.6 to switch off the button lock.
What does the E50/51 error mean on a strapex STB 75?
The E50/51 error, displayed with an orange display and pulsating symbol, indicates that the welding or cooling process was aborted by lifting the rocker lever. Repeat the strapping process.
What does it mean when symbols are flashing on my strapex STB 75 Power Tool?
Flashing symbols indicate that the battery temperature is too low. The tool should recover by itself at a higher battery temperature, and work is still possible, although the maximum strap tension may not be reached.
Step-by-step guide on how to place and insert the strap around packaged goods for strapping.
Covers the proper use of the tool, potential misuse, and safe working practices.
Provides essential safety warnings, including risks of jamming, crushing, and strap breaking.
Covers staying alert, using PPE, preventing unintentional starts, and proper tool handling.
Describes the tool's function, operating modes (Semi-automatic, Auto, Manual), and tension settings.
Instructions for charging, inserting, removing, and checking the status of the battery.
Guide to selecting and using the Semi-automatic, Fully automatic, and Manual operating modes.
Instructions on how to set the desired strap tension force for STB 71, 73, and 75 models.
Detailed steps for tensioning the strap, performing the weld, and cutting the strap.
Procedure for visually inspecting the quality of the weld seal after strapping.
Guide to interpreting display errors and performing corrective actions for common issues.
| Brand | strapex |
|---|---|
| Model | STB 75 |
| Category | Power Tool |
| Language | English |