Why does the display of my Strapex Power Tool remain dark?
The display might remain dark because the battery is faulty or fully discharged, so charge or replace the battery. Alternatively, the battery might not be properly inserted; check if it is completely inserted and the unlocking device is engaged.
What to do if my Strapex Power Tool shows E27 (E23) error with a red display and pulsating symbol?
The E27 (E23) error indicates that the battery undervoltage limits have been reached or the battery is empty. Charge the battery, and if the problem persists, replace it.
What causes E20 error on my strapex STB 73 Power Tool?
The E20 error, accompanied by a red display and pulsating symbol, indicates that the battery is too hot (over 60°C/140°F). Allow the battery to cool down. If the issue continues, try charging the battery or replacing it if necessary.
What does it mean when my strapex STB 73 displays E33 with a red display and pulsating symbol?
The E33 error, along with a red display and pulsating symbol, indicates electronics overtemperature or that the controller is too hot. Allow the tool to cool down.
What should I do if my strapex STB 73 displays E57 with the tension force display flashing?
The E57 error with a flashing tension force display suggests that the strap has slipped or broken. Reinsert the strap. Also, check the tension force, if the strap is dirty, the type of strap used, and the condition of the tension wheel/tooth plate.
What does E24 error mean on Strapex Power Tool?
The E24 error, shown with a red display and pulsating symbol, means the battery is not properly inserted. Ensure the battery is correctly inserted. It can also mean that the wrong battery is used, in which case you should charge the battery, replacing it if necessary.
How to fix E11 error on strapex STB 73 Power Tool?
The E11 error, along with a red display and pulsating symbol, indicates that an incorrect battery has been inserted. Insert the correct battery.
What does E55/56 error on my strapex STB 73 Power Tool mean?
The E55/56 error, accompanied by an orange display and pulsating symbols, indicates an aborting of the tensioning process, performance limitation, or a timeout. Try repeating the tensioning process.
What to do if strapex STB 73 Power Tool displays E25 error?
The E25 error, shown with a red display, pulsating symbol, and flashing indicators, suggests that the battery is not properly inserted. Ensure the battery is correctly inserted. It can also indicate a faulty temperature sensor, which may need replacement.
What causes E37 error on Strapex Power Tool?
The E37 error, displayed with an orange display and pulsating symbol, indicates that the tool is jamming during the welding process due to a dirty welding mechanism or a foreign body in the tool. Clean the welding mechanism.
Provides essential safety advice for operating power tools.
How to set standard and soft strap tension levels.
Step-by-step guide for applying straps around packages.
Procedures for visually inspecting the quality of the weld seal.
Steps for resetting the tool and diagnosing/resolving common errors.
General| Brand | strapex |
|---|---|
| Model | STB 73 |
| Category | Power Tool |
| Language | English |
To Next Page
