To Next Page
J
Julie CampbellSep 12, 2025
Why is the operating panel of my strapex STB 73 not reacting?
- IitownsendSep 12, 2025
The operating panel might not be reacting because the button lock is switched on. See Section 4.6 to switch off the button lock.
Why is the operating panel of my strapex STB 73 not reacting?
The operating panel might not be reacting because the button lock is switched on. See Section 4.6 to switch off the button lock.
What does the E50/51 error mean on a Strapex Power Tool?
The E50/51 error, displayed with an orange display and pulsating symbol, indicates that the welding or cooling process was aborted by lifting the rocker lever. Repeat the strapping process.
What does it mean when symbols are flashing on my strapex STB 73 Power Tool?
Flashing symbols indicate that the battery temperature is too low. The tool should recover by itself at a higher battery temperature, and work is still possible, although the maximum strap tension may not be reached.
Provides essential safety advice for operating power tools.
How to set standard and soft strap tension levels.
Step-by-step guide for applying straps around packages.
Procedures for visually inspecting the quality of the weld seal.
Steps for resetting the tool and diagnosing/resolving common errors.
General| Brand | strapex |
|---|---|
| Model | STB 73 |
| Category | Power Tool |
| Language | English |
