Strasbaugh 6DS-SP - Page 115

Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 7
Feature Menu(s)
Where to Find Details -
Manual Location(s)
PROGRAMMABLE PAD
CONDITIONING ARM
CALIBRATION AND
SETUP
Calibration/Configuration
Menu
Sweep Parameters Menu
Manual Control Menu
Operations:
• Ch. 4-Machine Setup
Maintenance:
• Ch. 9-Mechanical
Maintenance:
• Ch. 10-Software Calibration
• Appendix A-Calibration
Variables
POLISH AND CONDITION
FORCE UNITS AND
DIAMETER ENTRY
Machine Parameters Menu
Conditioning/Cleaning
Parameters Menu
Operations:
• Ch. 4-Machine Setup
MENU " HOPPING " Available at All Menus Operations:
• Ch. 3-Operator Functions
(topic: Menu Selection)
“ON THE FLY CHANGES” Auto Polish Menu
Process Parameters Menus
Operations:
• Ch. 3-Operator Functions
• Ch. 4-Machine Setup
AUTO CYCLE FEATURES Auto Polish Menu Operations:
• Ch. 3-Operator Functions
MANUAL CONTROL
MENU
Manual Control Menu Maintenance:
• Ch. 9-Mechanical
• Ch. 10-Software Calibration
SERVO CALIBRATION Manual Control Menu
Calibration/Configuration
Menu
Diagnostics Menu
Maintenance:
• Ch. 9-Mechanical
• Ch. 10-Software Calibration
“LEVER TYPE”
CONDITIONING ARM
SUPPORT
Calibration/Configuration
Menu
Maintenance:
• Ch. 10-Software Calibration
• Appendix A-Calibration
Variables
“SINGLE” SWEEP STYLE
CHOICE
Conditioning/Cleaning Menu Operations:
• Ch. 4-Machine Setup
WET IDLE SLURRY
FLUSH
Machine Parameters Menu
Slurry Flush Menu
Operations:
• Ch. 3-Operator Functions
• Ch. 4-Machine Setup