Operations Model 6DS-SP Planarizer
3 - 52 Version 4.0 - February 1998
1 - POWER UP
Following the steps found in the Basic Operation section of this chapter,
above, power up the machine.
2 - PERFORM HOME SEQUENCE ROUTINE
Following the steps found in the Basic Operation section of this chapter,
above, home the machine.
3 - PLACE CARRIERS ON SPINDLES
Following the steps found in the Basic Operation section of this chapter,
above, place carriers on spindles.
4 - RETRIEVE A STORED RECIPE
Following the steps found in the Basic Operation section of this
chapter, above, retrieve a stored recipe.
To Next Page
Loading...
