Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 53
5 - RUN AN AUTO POLISH CYCLE USING THE
“START WITH LOAD” FEATURE
Select the Auto Polish Cycle Menu and choose Start With Unload:
Operator Action Explanation/Screen Display
1. <F9> Press the F9 key to choose
“Select Menu”.
2. <F1> Display the Auto Polish Cycle
Menu by pressing the F1 key to
select “Auto Cycle”.
Screen displays the Auto Polish
Cycle menu.
3. <F8> Press the F8 key to choose
“OTHER”.
4. <F3> Press the F3 key to choose “Start
W/Load”.
To Next Page
Loading...
