Strasbaugh 6DS-SP - Page 24

Strasbaugh Introduction
Version 4.0 - February 1998; Update 10/19/01 1 - 5
For information on 4.25 and post-4.25 software version features, refer to the
6DS-SP User Interface Reference documentation, located in Appendix A
of the 6DS-SP Maintenance manual.
NOTE
With each new 6DS-SP software release, replace the 6DS-SP
Calibration/Configuration Reference and 6DS-SP User Interface
Reference documentation found in Appendix A of the 6DS-SP Maintenance
manual with the new documentation received in the software release.
REVISED, UPDATED ENGINEERING DRAWINGS
The Engineering Drawings, located in Maintenance Volume 2, Appendix B,
have been revised to include up-to-date part numbers and maintenance
information for new features and engineering advances.
6DS-SP USER INTERFACE REFERENCE
DOCUMENT ADDITION
The 6DS-SP User Interface Reference document, found in Appendix A of
6DS-SP Maintenance manual (Vol. 2), shows all of the 6DS-SP user
interface menus with a brief description of each item. This document is
updated and included with each new 6DS-SP software version release.
Updated versions of this document and the 6DS-SP Calibration/
Configuration Reference should be filed in place of existing versions as
new software versions are received.
NOTE
The 6DS-SP User Interface Reference only provides brief feature
descriptions and is NOT intended as a guide to machine operation.