Strasbaugh 6DS-SP - Page 309

Strasbaugh Troubleshooting
Version 4.0 - February 1998 5 - 51
“LEAK DETECTION FAULT” - # 108
Problem
Indicator
Problem
Location
Component/ Cause
Resolution
ERROR
MESSAGE
Control
Computer
Screen
(1) Fluid leak.
Three pans at
machine bottom
(one at load area;
two at polish area)
are equipped with a
sensor to detect
liquid.
(2) Sensor
malfunction.
(1a) Let cycle finish.
(1b) Clean up spillage.
(1c) Check all water
lines.
(1d) Check/clean out
pan drain.
OPERATIONS
(2a) Check and adjust
sensor.
MAINTENANCE