Maintenance Model 6DS-SP Planarizer
9 - 16 Version 4.0 - February 1998
TOOLS AND PARTS RECOMMENDED
• 6DS-SP ACC 72 Carrier Tool Kit - Item #218327
Note: The Carrier Tool Kit includes the Carrier Adjusting Tool Assembly,
detailed immediately below.
Carrier Adjusting Tool Assembly (Strasbaugh Indicator Depth
Gauge Assembly) - Item #233595
Consisting of:
- Mitutoyo Indicator Depth Gauge - Item #218198
- Indicator Point, Flat Carbide - Item #218199
- Indicator Depth Gauge Holder - Item #218201
• 6DS-SP ACC 30R (200 mm) Carrier Spare Parts Kit - Item #233556
• 6DS-SP ACC 45/45R (150 mm) Carrier Spare Parts Kit - Item #233555
• 6DS-SP ACC 58 (125 mm) Carrier Spare Parts Kit - Item #225134
• 6DS-SP ACC 56 (100 mm) Carrier Spare Parts Kit - Item #225133
• 6DS-SP ACC 57 (75 mm) Carrier Spare Parts Kit - Item #225132
Note: Refer to the Appendix of this document for a bill of materials for
each of the six kits shown above.
• plastic block with hole in center large enough to permit carrier top plate
quill socket to extend down through the block while the block supports the
top plate
• 6DS-SP Carrier Assembly Table - Item #220640
Note: The Carrier Assembly Table includes the Bench Top Carrier Fixture,
listed below.
• 6DS-SP Bench Top Carrier Fixture - Item #219570
• retaining ring plier
• feeler gauge
• 1/4-in. socket wrench
To Next Page
Loading...
