Maintenance Model 6DS-SP Planarizer
10 - 14 Version 4.0 - February 1998
Left Load Chuck Up/Down
Right Load Chuck Up/Down
Raises and lowers the load station load
chucks.
Left Send Elev Move
Slot Up
Slot Down
Slot 1
Slot 25
Right Send Elev Move
Slot Up
Slot Down
Slot 1
Slot 25
Left Recv Elev Move
Slot Up
Slot Down
Slot 1
Slot 25
Right Recv Elev Move
Slot Up
Slot Down
Slot 1
Slot 25
or
Scrubber Move
Load
Unload
Moves the elevator to Slot l, Slot 25, one
slot up, or one slot down. Entry is slightly
different from all other manual control items
because the last entry shows when View
Choice is first reselected. This permits faster
multiple slot incrementing by allowing a
repeated "View Choice"/"Enter Choice"
sequence.
Also, whether the elevator is currently
"active" or "inactive" is shown. An elevator
that is "active" will be used by the automatic
cycle. An elevator that is "inactive" is
ignored by the automatic cycle.
If the optional scrubber station is installed,
the choices available for the right receive
elevator are replaced by the scrubber
choices of "Load" and "Unload".
Note: Anything involving a servo system for either moving or safety checking
prior to moving requires that the servo system be homed.
To Next Page
Loading...
