Strasbaugh Software Calibration Procedures
Version 4.0 - February 1998 10 - 65
RIGHT SEND ELEVATOR
ROUGH HEIGHT ADJUSTMENT
Repeat as for Left Send Elevator, making the following substitutions:
1. At the Calibration/Configuration Menu:
81 = Right send offset to slot 0
2. Substitute right send elevator for left send elevator where appropriate.
FINE HEIGHT ADJUSTMENT
Repeat as for Left Send Elevator, making the following substitutions:
1. At the Calibration/Configuration Menu:
81 = Right send offset to slot 0
2. Substitute right send elevator for left send elevator where appropriate.
To Next Page
Loading...
