Maintenance Model 6DS-SP Planarizer
10 - 66 Version 4.0 - February 1998
LEFT RECEIVE ELEVATOR
ROUGH HEIGHT ADJUSTMENT
Repeat as for Left Send Elevator, making the following substitutions:
1. At the Calibration/Configuration Menu:
82 = Left receive offset to slot 0
2. Substitute left receive elevator for left send elevator where appropriate.
3. Make the substitutions specified for receive elevators in the text of the
procedure.
FINE HEIGHT ADJUSTMENT
Repeat as for Left Send Elevator, making the following substitutions:
1. At the Calibration/Configuration Menu:
82 = Left receive offset to slot 0
2. Substitute left receive elevator for left send elevator where appropriate.
3. Make the substitutions specified for receive elevators in the text of the
procedure.
To Next Page
Loading...
