Maintenance Model 6DS-SP Planarizer
10 - 136 Version 4.0 - February 1998
Counters
• Counter 12 = Left Pressure Output
• Counter 13 = Right Pressure Output
LEFT SPINDLE
B. ADJUSTMENT PROCEDURE
1. Open the electrical cabinet doors and pull out the door interlock contact
plunger to permit the machine to maintain power with the doors open.
2. Restart the machine.
3. Rehome the machine.
4. Load a carrier onto each spindle.
5. At Page 1 of the Manual Control Menu, select Bridge Move and choose
Pol Tbl 1 to move the bridge to polish position.
To Next Page
Loading...
