Maintenance Model 6DS-SP Planarizer
11 - 32 Version 4.0 - February 1998
8. Power up the machine.
9. Test the adjustment by repeating Section B., above.
a. If the goal is not met, repeat the adjustment (Step 5. of this section,
above).
Continue testing and adjusting until the goal is met.
b. When the goal is met, go on to When A Satisfactory Adjustment Is
Achieved, below.
D. WHEN A SATISFACTORY ADJUSTMENT IS ACHIEVED
1. Replace the bridge covers.
2. Power up and home the machine.
To Next Page
Loading...
