Maintenance Model 6DS-SP Planarizer
12 - 12 Version 4.0 - February 1998
STARTING THE 6DS-SP CONTROL
PROGRAM AT THE DOS PROMPT
To start the 6DS-SP control program at the DOS prompt after such procedures as
formatting diskettes or backing up, follow one of the two methods below:
1. Method 1:
Operator Action Explanation/Screen Display
a. <Ctrl> <Alt> <Del>
While holding down the Ctrl key and
the Alt key, press the Del key.
b. Wait. Wait for the control computer to
reboot and display the Main Menu
screen.
When the control computer is ready,
the screen will display the
6DS-SP Main Menu.
2. Method 2:
Operator Action Explanation/Screen Display
• F <Enter> Type “F” to restart the 6DS-SP
control program.
When the control computer is ready,
the screen will display the
6DS-SP Main Menu.
To Next Page
Loading...
