Remedying Faults at PP 1207–Klöckner Möller
Remedying faults PP 1207
page 1 –April 2005
Frequently occurring faults and remedies for them
are explained in the following tables.
The tables are divided up according to main fault areas.
• Machine has no function
• Machine does not run in automatic mode
• Machine does not run in manual mode
• Bale cannot be ejected
• Press plate dropping -oil leakage
• Door does not rise automatically
• Hydraulic problems
• Electrical problems
This documentation is also intended for the EK 1107/1109 and
PP 1208
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de
To Next Page
Need help?
General
