Strautmann EK 1107 User Manual

Remedying Faults at PP 1207–Klöckner Möller
Remedying faults PP 1207
page 1 –April 2005
Frequently occurring faults and remedies for them
are explained in the following tables.
The tables are divided up according to main fault areas.
• Machine has no function
• Machine does not run in automatic mode
• Machine does not run in manual mode
• Bale cannot be ejected
• Press plate dropping -oil leakage
• Door does not rise automatically
• Hydraulic problems
• Electrical problems
This documentation is also intended for the EK 1107/1109 and
PP 1208
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de

Strautmann EK 1107 Specifications

General

Brand	Strautmann
Model	EK 1107
Category	Power Tool
Language	English

Summary

Machine has no function

Control has no function

Troubleshooting steps for an unresponsive control system.

Motor has no function (control function present)

Addresses motor issues when control functions are operational.

Machine does not run in automatic mode

Motor running but machine has no function

Explains why machine fails to operate despite motor running.

Machine breaks down after short period

Machine does not start

Machine does not run in manual mode

Hydraulic problems

Machine fails to build up high pressure

Troubleshooting for when the machine fails to generate sufficient hydraulic pressure.

Electrical problems

Motor protection trips and power fuses blow

Covers issues with motor protection trips and blown power supply fuses.

Motor does not switch off