Strautmann EK 1107 - Motor Protection Switch Trips and Power Supply Cable Fuses Trip

Remedying Faults in PP 1207–Klöckner Möller
Remedying faults PP 1207
page 47 –April 2005
A. Measure the motor current and adjust trigger level.
If motor contactor has seized up, replace it.
8.1 Motor protection switch trips and power supply cable fuses
trip.
A. Current value set too low, component faulty, motor too hot, pressures set too high
or motor faulty
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de