Strautmann EK 1107 - Door Does Not Move Automatically or Tilts While Starting

Remedying Faults in PP 1207–Klöckner Möller
Remedying faults PP 1207
page 37 –April 2005
A. Check door
mechanism and
adjust if necessary.
B. Check sensor adjustment and
readjust if necessary. Replace
faulty sensors
6.1 Door does not move automatically or tilts while starting
1. A. Locking pins or door mechanism faulty or not free-moving
Magnetic switch faulty or misaligned
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de