Strautmann EK 1109 - User Manual

Remedying Faults at PP 1207–Klöckner Möller
Remedying faults PP 1207
page 1 –April 2005
Frequently occurring faults and remedies for them
are explained in the following tables.
The tables are divided up according to main fault areas.
• Machine has no function
• Machine does not run in automatic mode
• Machine does not run in manual mode
• Bale cannot be ejected
• Press plate dropping -oil leakage
• Door does not rise automatically
• Hydraulic problems
• Electrical problems
This documentation is also intended for the EK 1107/1109 and
PP 1208
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de

Summary

Machine has no function

Control has no function

Troubleshooting issues related to the control system, including emergency stop and power supply.

Motor has no function (control function present)

Addresses motor operational issues when control functions are active but the motor fails to run.

Machine does not run in automatic mode

Motor is running but machine has no function

Machine breaks down after running for short period

Machine does not start

Details reasons and remedies for the machine failing to initiate operation.

Bale cannot be ejected

Bale cannot be ejected

Hydraulic problems

Machine does not build up high pressure

Troubleshoots failures in achieving adequate system pressure, crucial for machine performance.

Electrical problems

Motor protection switch trips and fuses for power supply leads trip

Covers troubleshooting when motor protection trips and power supply fuses blow, indicating overload or short circuits.

Motor does not switch off

Details troubleshooting for the motor failing to stop when commanded, possibly due to limit switch or contactor issues.

Strautmann EK 1109 Specifications

General

Brand	Strautmann
Model	EK 1109
Category	Power Tool
Language	English