Strautmann PP 1208 - Protective Equipment Description; Emergency Stop Device Location; Gantry Press Safety Equipment

Remedying Faults in PP 1207–Klöckner Möller
Remedying faults PP 1207
page 14 –April 2005
D. Test motor power supply
cable:
Apply continuity tester to single
leads.
If one or more leads have no
continuity or the measured
resistance is more than 3 ohms:
replace cable.
1.2 Motor has no function (control function present)
D. Lead to the motor is faulty
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de