Need help?Do you have a question about the Streamax AD Plus2.0 and is the answer not in the manual?
Introduces the AD Plus2.0 device as an intelligent device integrating various alarm systems and EDR.
Highlights the AD Plus2.0 as a cost-effective intelligent device for remote video and driving safety surveillance.
Guides users on how to download and install the 'Veyes' app for Android and iPhone devices.
Explains the process of logging into and out of the device using the truck EasyCheck app via Wi-Fi.
Details the Basic Info section showing server connection, IO status, OBD, G-Sensor, ACC, pulse, and device status.
Explains the Device Module section which displays the status of Wi-Fi, 3G/4G, and positioning modules of the device.
Details the Location Info screen for checking satellite positioning signal quality and evaluating device positioning capability.
Describes the Storage Device section for viewing and formatting built-in and external storage devices.
Explains the Version Info screen for viewing software version information and performing local upgrades.
Covers importing/exporting O&M logs, restoring default settings, and rebooting the device via USB or SD card.
Explains how to view real-time recording of each channel, zoom in/out, and what 'VIDEO LOSS' signifies.
Details the step-by-step process for performing ADAS calibration, including inputting installation parameters.
Provides instructions for performing DSC calibration, including selecting channels and calibration types.
Outlines the steps for performing DMS (Driver Monitoring System) calibration, including installation location selection.
Explains how to search and view main-stream or sub-stream video recordings by selecting a specific date.
Describes how to export selected video time periods to external storage or a mobile phone for sharing.
Explains how to set up device and vehicle information, including serial number, plate number, and VIN.
Details how to set the date format, time format, and time zone for accurate timekeeping and display.
Explains ON/OFF modes, ignition delay, video delay, and timer settings for device power management.
Configures sleep modes (standby or zero power), sleep time, and low voltage protection settings.
Sets wake-up methods like IO alarm, G-Sensor, remote commands, and telephone/SMS calls.
Configures shutdown and wake-up thresholds based on distance and G-Sensor acceleration.
Describes how to manage users, add new users, and set user permissions for accessing the system.
Details how to configure server settings, including adding/deleting servers and setting protocol types (N9M/808).
Configures local network parameters like IP address, subnet mask, and gateway using DHCP or static IP.
Manages Wi-Fi hotspot parameters, connection modes (AP/Client), encryption, and password settings.
Covers settings related to the communication module, enabling network connectivity via different methods.
General| Category | Dash Cameras |
|---|---|
| ADAS | Yes |
| DSM | Yes |
| BSD | Yes |
| Video Resolution | 1080p |
| Frame Rate | 30 fps |
| GPS | Yes |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Night Vision | Yes |
| Power Supply | 12V/24V |
| Storage | MicroSD, up to 128GB |
| Lens Angle | 140 degrees |
To Next Page
