6.3 Info Page
Figure 15 Decoder Web UI Info Page
Statistics
The statistics section shows information about the incoming ACT-L3/L5 stream. If there is no incoming
ACT-L3/L5 stream, the statistics will show zero or N/A.
Bitrate: the current data rate of the incoming ACT-L3/L5 stream as viewed by the Decoder. This value may be
slightly different from the bitrate that is set on the ACT-L3/L5 Encoder that is sending the stream.
Buffer: the current size of the Decoder’s receive buffer. This value will vary based on the bitrate, VBR buffer
size, and jitter used.
Lost Frames: the total number of frames that have been lost due to packet loss.
Recovered Packets: the number of packets that have been recovered using forward error correction.
Metadata
Metadata can be used to further identify an incoming stream. Metadata is entered on the ACT-L3/L5 Encoder
software under the Metadata menu and is transferred to the Decoder inside the ACT-L3/L5 Stream.
Title (formerly Slug): a name given to the video stream
Location: the location from where the live video feed is sent (or any descriptive text entered by the user)
Connectivity: the type of connection used to transport the ACT-L3/L5 Stream
Reporter: the name of the user operating the Streambox ACT-L3/L5 Encoder (or any descriptive text entered
by the user)
To Next Page
Loading...