Need help?Do you have a question about the Strebel S-HR 60 and is the answer not in the manual?
Details the components included in the supply kit for the unit, ensuring readiness for installation.
Provides guidance on wall mounting requirements and critical dimensions for installing the unit.
Covers connecting the central heating system, expansion tank, and considerations for underfloor heating.
Details connections for gas supply, hot water, condensation discharge, and flue gas exhaust systems.
Outlines the necessary electrical connections, safety regulations, and wiring guidelines for the unit.
Explains the unit's control system and the functions of various keys on the operating panel.
Guides users through the process of filling and venting the installation and initiating unit operation.
Details how to perform adjustments at both user and installer levels for optimal unit performance.
Covers initial commissioning steps, routine checks, and general maintenance procedures for the unit.
Explains service access, error codes, and how to reset the unit in case of faults or issues.
Provides instructions on how to safely switch off the unit and recommendations for maintenance scheduling.
Presents detailed technical specifications for various S-HR boiler models.
Illustrates the various parts of the unit with clear diagrams and component labels.
Shows example diagrams for connecting the unit to radiator installations without thermostat valves.
Illustrates connection diagrams for installations combining radiators and underfloor heating zones.
Provides diagrams for connecting the unit to two independently controlled radiator zones.
Lists and explains various block and error messages indicated by the unit's control system.
Explains the symbols, signs, and operation indications shown on the Control Tower display.
To Next Page
General
