Strend Pro BGD1702-80-X - Intended Use; Technical Parameters; Explanations of Symbols

EN
INTENDED USE
- Based on the principle of condensation, the appliance takes care of the automatic dehumidification of the air
in the room.
Use the appliance only for its intended purpose. Any other use is considered a case of improper use. The user /
operator and not the manufacturer will be liable for any damage or injury caused by this improper use. Please
note that this appliance is not designed for commercial or industrial use. The warranty will not be valid if the
device is used for commercial, industrial or similar purposes.
TECHNICAL PARAMETERS
VOLTAGE / FREQUENCY
230 V / 50 Hz
DEHUMIDIFICATION PERFORMANCE
70 l/d (30 °C RH 80%)
40 l/d (27 °C RH 60%)
POWER CONSUMPTION
1 300 W (30 °C RH 80%)
950 W (27 °C RH 60%)
RATED CURRENT
4,7 A
MAX. CURRENT
5,7 A
MAX. INTAKE PRESSURE
1 MPa
MAX. DRAIN PRESSURE
2,5 MPa
COOLING SUBSTANCE
R290 / 280 g
WEIGHT
43 kg
DIMENSIONS
545 x 460 x 870 mm
WORKING TEMPERATURE
5 – 35 °C
AIR FLOW
400 m
3
/h
EXPLANATIONS OF SYMBOLS
The product complies with the applicable European directives and the method of
assessing the conformity of these directives has been performed.
Read the instructions manual.
Do not throw away with the normal household waste. Instead, turn to recycling centers in
an environmentally friendly way. Please take care to protect the environment.
Protection degree IP22.
Handle the device carefully.
This side up.
Protect the device from moisture.
Caution fragile!
Danger of electric shock!
It is strictly forbidden to disassemble, modify the device or its accessories! In the event of
any damage to the device or its components, disconnect it from the mains immediately