EasyManua.ls Logo

Strend Pro BGD1702-80-X - Control Panel; Operation

Strend Pro BGD1702-80-X
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
CONTROL PANEL
A – ON/OFF
B – Timer
C – “+“
D - “-“
OPERATION
ASSEMBLY
WARNING: The appliance is filled with flammable gas R290. The appliance must be installed, operated and
stored in a room with a floor area of more than 15 m2.
Handle assembly
- Attach the handle to the appliance with 4 screws.
OPERATION
Memory function:
- In the event of a sudden power failure or accidental
disconnection of the appliance from the mains, the system
automatically saves the operating mode in which the
dehumidifier was operating just before the incident.
- After switching on again, the appliance will continue in the
operating mode that has been stored in memory.
Defrost function:
1. Automatic defrost
- It automatically defrosts to prevent ice from forming on the
appliance during continuous operation.
- If the spiral temperature is below C for at least 30 minutes and the appliance is in operation for at least 20
minutes, it will start to defrost.
- Defrosting ends when the spiral temperature is higher than C for at least 90 seconds or after 8 minutes of