Stressless Sam - 2. User Instructions; 2.1 General User Instructions

9
2. User instructions
2.1 General user instructions
• This product has movable parts. Make sure that there is ample space around the recliner or
sofa before operaon to avoid that any part of the furniture interferes with walls or other
inventory.
• Due to the weight of the product a minimum of two people is required for installing and moving
the furniture.
• Li the furniture with a rm and controlled grip under the main construcon.
• Never lean or sit on the armrests, back or footrest.
• Sit down in a controlled way, not by dropping or throwing the full body weight into the seat.
• Moving parts must only be operated by the designated control panel or handheld controller
from the supplier. Never use manual force to change posion of the moving parts.
• If the recliner or sofa is equipped with a baery, the footrest and backrest might automacally
fold and return to “home” posion when the baery runs out of power. Never leave the furni
ture other than in “home” posion.
• If your furniture has heang or massage as an opon, the furniture must be directly connected
to a wall outlet – not operated by baery.
• If your furniture has heang or massage as an opon, note that these funcons have an
automac mer to shut o the massage and heat funcons aer 10 minutes of operaon.
Both funcons can easily be switched back on.
• Note that the massage and heat funcons may start automacally aer a power outage.
CAUTION! The chair has no user serviceable parts, if the chair is damaged or not operated,
it must be repaired by an authorized service representave.
When the chair is not in use, make the chair to the upright posion. Remove the power cord,
adaptor from the chair. Store the power cord, adaptor and chair in a dry locaon where children
can not play with these parts.
English