42
REVIEW FOOTAGE
Option 1: On the device
③ Enter TEST mode
④ Adjust desired settings
⑤ Enter ON mode
Slide the mode switch to “TEST”. Then click on the
“REPLAY” button to view all images and videos. Use the
menu buttons to navigate through all the footage.
Slide the mode switch to “TEST” to activate the Camera
and view the setup screen. While in TEST mode you can
change all settings to the desired settings and also view
previous recordings.
While in the “TEST” modus click the “MENU” button.
While in the menu you can congure all options to your
desired settings. See the chapter “SETTINGS” for all
available options.
After you have completed all settings slide the mode
switch to “ON” to enter working mode. The screen will
count down 10 seconds and then go black. The Camera
is now in auto-working mode and will start taking
photos and videos based on the congured settings
immediately.
To Next Page
Loading...
Need help?
General
