50
GENERAL DEVICE SAFETY
● Do not use the Camera for any other purpose other than its intended use (see the chapter
“INTENDED USE”).
● The Camera is designed and intended for private use and is not suitable for commercial or
industrial use.
● The Camera can be used both indoors and outdoors.
● Handle the device carefully. Jolts, impacts, or a fall even from a low height can damage the
device.
● Do not place the Camera on any unstable surface. This may result in falling and cause
malfunction.
● Do not place the Camera under mechanical stress.
● The device needs to be properly and securely installed and mounted. Follow the instructions to
prevent any possible damage/injury.
● The device needs to be properly and securely connected when using an external power supply.
Follow the instructions to prevent any possible damage/injury.
● Do not use batteries in the Camera when using an external power supply.
● Never use accessories not recommended by the manufacturer. They can pose a danger to the
user and damage the device.
● Never drop or insert any object or ngers into any opening.
● Do not apply excessive force when using the buttons on the Camera.
● Do not apply excessive force on the display and do not touch the display with sharp objects.
● Do not use the Camera near strong magnetic elds, e.g. motors, transformers, mobile phones,
etc.
● If it is no longer possible to operate the Camera safely, take it out of operation and protect it
from any accidental use. A safe operation can no longer be guaranteed if the device:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to serious transport-related stresses.
To Next Page
Loading...
Need help?
General
