3.2 Basic Use
3.2.1 Power Key
1.Power on: When the GPS power is full or after connecting the device with an
external power supply, press the power key for more than four seconds to start up.
2.Power off: Press the power key for more than four seconds to turn off the GPS.
3.Sleep mode: When the device turns on, quickly press the power key to enter
sleep mode. The GPS will automatically display in its last state when you next
start-up.
3.2.2 Reset Key
If the system will not respond, press the reset key on the back of device to re-start
the system. You should do this when:
1.There are delays when you switch interfaces.
2.There is no response when you click the icons.
3.The power key won’t respond.
Caution- Please backup the data before resetting the
system.
3.2.3 Motorcycle Fixed Bracket
Attention: Fix the Motorcycle GPS device to a safe position on the handlebars to
avoid the GPS blocking the driver's view. Make sure the screws have been locked
tightly.
3.2.4 SD/MMC Memory Card
Correctly insert SD/MMC card into the slot, and do not remove the SD/MMC card
during operation.
Caution
To Next Page
Loading...