Need help?Do you have a question about the Strom-Electrical SEIH7KTS1 and is the answer not in the manual?
General| Brand | Strom-Electrical |
|---|---|
| Model | SEIH7KTS1 |
| Category | Water Heater |
| Language | English |
Read all instructions before installing or using. Connect to mains water. Not for unattended children/elderly due to scalding risk. Must be installed by qualified professional.
Ensure appliance is intact, fittings complete, power supply, water pressure, earthing, and cabling meet standards. Check appliance is properly earthed.
Drain down if exposed to frost. Do not operate if frozen. Ensure flow temp is not excessive. Clean filter washer regularly. Do not modify unit. Install vertically with connections downwards.
Diagram illustrating key components like thermal cut-out, heating chamber, temp. sensor, flowmeter, and display board.
Diagram showing the electrical connections for the water heater, including Triac and Terminal Blocks.
Details on how to mount the hanger bracket to the wall and secure the heater unit to it, including hole dimensions.
Guidance on connecting the unit to the mains water supply, fitting a check valve, and connecting to the hot pipework circuit.
Steps for flushing the system, turning on power, setting temperature, and balancing flow rate for optimal performance.
Explanation of how the heater automatically detects flow and how to control the output temperature using the buttons.
Recommendation to clean the filter washer regularly to ensure good flow rates and product efficiency.
Table listing common system issues, likely causes, and possible solutions for leaks, display errors, temperature, and flow rate problems.
Details on the 12-month guarantee, conditions for validity, and specific exclusions like corrosion or lack of maintenance.
To Next Page