INTRODUCTION
Thank you for purchasing your Strom-Electrical instaneous water heater, we are very proud of our products
and we are sure that you will be happy with the years of service you get from your model. This product has
been designed to operate at mains pressure and deliver instant hot water.
SPECIFICATION
MODEL SEIH7KTS1 SEIH9KTS1 SEIH11KTS1
Body Material High Quality Glossy IMD Cover
Voltage 220-240v
Rated Frequency 50-60Hz
Power 7.5kW 9.0kW 11.0kW
Rated Current 32.7A 39.2A 47.9A
Supplied Cable Size
6.0mm
2
6.0mm
2
10.0mm
2
Overheat Protection 67
o
C
Thermal Cut-Out 90
o
C
Control Mode Touch Screen Controls
Temperature Range 30
o
C - 55
o
C
Water Connections G1/2”
Working Pressure 0.02-0.6mPa
IMPORTANT NOTICE
• For your satisfaction and safety, read all instructions before installing or using this instant hot water
heater.
• This appliance should be connected to a public mains water feed.
• This water heater may not be suitable for children or some elderly operators unattended due to the
risk of scalding should the unit be incorrectly operated.
• Your Strom-Electrical water heater MUST be installed and maintained regularly by a qualified
To Next Page
Loading...