EasyManua.ls Logo

Strong SRT 8114 - Installing the Batteries; Using the Remote Control

Strong SRT 8114
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
12. RECORD Records the TV programme to the connected USB storage device
13. TIMESHIFT Activates the Timeshift function (Off/On)
14. 0~9 Enters a channel number in viewing mode or a value inside the
respective menu
15. EPG Opens the EPG (Electronic Programme Guide) in TV mode
16. RECALL Back to previously watched channel
17. AUDIO Opens the audio language selection
18. TV/RADIO Toggles between TV or RADIO mode
19. FAV Opens the favourite group selection
20. FILE Opens the Media Player list
21. TTX Displays Teletext on the OSD (On Screen Display)
22. SUBTITLE Shows a list of subtitle languages
23. 5 6 Fast rewind/fast forward
24. Coloured buttons For Multimedia and Teletext functions
2.5 Installing the batteries
Fig. 4
Open the cover on the remote control and insert 2x AAA batteries into the compartment. Correct
position of the polar diagram shows the batteries inside the compartment.
1. Open the cover.
2. Insert the batteries.
3. Close the lid.
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
2.6 Using the remote control
Fig. 5
To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.
NOTE: Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver)
and the remote control. Direct sunlight or very bright light can reduce or
disturb the reception of the remote control signals.
6