therefore not possible. In this case the Move function is marked grey and cannot be selected. The
default setting for this function is O and you are free to sort the channels in the main channel list.
As soon as the broadcaster supports this function you can activate it by setting it from O to On.
In this case the receiver will delete all current channels and favourite lists and start a fully new scan
process. Please conrm the displayed message with OK to proceed.
7.3.4 Parental Control
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also
create a new PIN code. Use pq to select Parental Control from the Settings menu and press OK to
proceed. You will be asked to enter your PIN code. (DEFAULT PIN: 0000)
Menu Lock: Locks the installation menu. You can set the Menu Lock to On or O.
Program Lock: Switch all programme/channels lock to On or O. If the lock is set in the TV
or Radio Manager menu. You can select the lock separately for every channel
which you like to protect it with a PIN code.
Program Lock age: Choose between: O Lock None, Lock All, 4 years and up to 18 years. Channels
with a parental rating above the chosen age will be protected with a PIN code
(if available in your local broadcast.)
PIN Code Change: Press OK to enter the menu.
Old PIN Code: Enter your current PIN code (4 digits).
New PIN Code: Enter your new PIN code (4 digits) you'd like to use.
(Make a note of it.)
Conrm: Re-enter your new PIN code to conrm. Press OK to end and save the change.
7.3.5 Time Settings
Here you can set up your time zone for clock/time in your menu and system.
Use pq to move the highlight to the setting of choice. Values can be changed with t u. Press
to leave.
GMT Usage: Set to Auto for broadcaster dened time depending of country selection you
made in the First Installation Wizard. Normally, the clock/time will be correct
and also follow up the summer time changes automatically. In some regions
close to neighbouring countries it can happen that the wrong time zone is
followed. In this case select the option User Dened to set up time manually in
the next steps below.
GMT Oset: Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to User Dene.The GMT Oset range is “-11:00 ~
+12:00”.
Daylight Saving: Select O or On to add one hour extra for summer time.
7.3.6 Timers
This menu allows you to set up to 10 timed events for waking up the receiver.
Use pq to select Timer from the Settings menu and press OK to enter.
The receiver will display a list with 10 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press OK to proceed.
19
To Next Page
Loading...