PART 1 • English
English
1
1.0 INTRODUCTION
Thank you for purchasing the Strong SRT ANT 10 DVB-T Antenna. This antenna has been
specially designed to be used to receive digital terrestrial signals from the air. It can be
connected to any Digital Terrestrial Receiver (DVB-T), and is designed for INDOOR use only.
This DVB-T Antenna is a “Active type” antenna, it has an build-in low noise amplifier that
amplifies the received signals for better performance.
We recommend you to carefully read this user manual before you install the antenna, this
will help you to get the best performance out of your antenna.
Specifications:
Frequency range: VHF 47 ~ 230 MHz, UHF 470 ~ 870 MHz
Gain: 21 dB ± 3 dB for VHF and UHF
RF Output Impedance: 75 Ohm
Power Supply - 2 powering methods: 5 Volts / 40 mA via RF port of the STB or
9 Volts DC / 100 mA via External 230 Volts AC to
DC adapter
Special Features:
n Build in Low Noise Amplifier technology
n High Directionality: optimised pointing to the transmitter and reduced pick-up of
disturbing signals
2.0 PACKAGE CONTENTS
n SRT ANT 10 – Active DVB-T Indoor Antenna
n Standing unit
n Coaxial Cable- 2 meter
n User Manual
TABLE OF CONTENTS
1.0 INTRODUCTION 1
2.0 PACKAGE CONTENT 1
3.0 SAFTY NOTES 2
4.0 CONNECTING THE ANTENNA 2
5.0 INSTALLATION OF THE ANTENNA 3
To Next Page
Loading...
