18
Working surface is too small,
tips slip off.
Only for increasing the size
of a gap (not suitable for
spreading)
Tips get a safe grip. Work with the tips only.
Do not damage the tool
arms!
(Illustration of the
spreader tips as an
example.)
6.4 Spreading open doors
The door opener tips are especially designed for using them for forced opening of locked
doors.
6.4.1 Points of application:
Doors with single protection: locking furniture and hinge plates.
Doors with multiple protection: locking furniture, hinge plates
and at each locking bolt, if required.
6.4.2 Procedure
When applying the unit, the claws must be pressed
or beaten into the door crack as hard and deep as
possible (refer to application examples).
When working in an environment which involves the
risk of explosions, sparks must be avoided when the
claws are pushed into the door gap!
WARNING / CAUTION / ATTENTION!
- There is the risk of sparks, if the device gets in contact with metal or stone!
- There is the danger of injuries in the area doors breaking open.
To Next Page
Loading...