Need help?Do you have a question about the StrongLink SL025B and is the answer not in the manual?
Defines communication parameters like baud rate, data bits, stop bits, parity, and flow control.
Describes the data packet structure for communication between the host and the SL025B module.
Lists and describes the available commands for the SL025B module, including status codes.
Details specific commands, their parameters, and responses for various operations.
Details the response format including status, UID, and card type after selecting a Mifare card.
Specifies the response for sector login attempts, including success, failure, and error codes.
Details the response after downloading a key, including operation success or failure status.
Provides the response for logging into a sector using a stored key, indicating success or failure.
Details the response for reading a data block, including status and returned data.
Specifies the response after writing to a data block, including status and written data.
Details the response for reading a value block, including status and the value read.
Details the response for initializing a value block, including status and the written value.
Specifies the response after writing a master key, including status and the written key.
Details the response after incrementing a value, including status and the new value.
Details the response after decrementing a value, including status and the new value.
Specifies the response for copying a value between blocks, including status and the copied value.
Details the response for reading a data page, including status and the page data.
Specifies the response after writing a data page, including status and the written page data.
Details the response for managing the red LED, indicating operation success or failure.
Specifies the response for retrieving the firmware version, including status and version data.
General| Brand | StrongLink |
|---|---|
| Model | SL025B |
| Category | Control Unit |
| Language | English |
To Next Page