StrongLink SL025B - Response for Read Data Page; Command: Write Data Page (UltraLight & NTAG203); Response for Write Data Page; Command: Manage Red LED

StrongLink SL025B
http://www.stronglink-rfid.com
11
Response:
0xBD
Len
0x10
Status
Data
Checksum
Status: 0x00: Operation succeed
0x01: No tag
0x04: Read fail
0x08: Address overflow
0xF0: Checksum error
Data: Block data returned if operation succeeds, 4 bytes.
4-4-14. Write a data Page (UltraLight & NTAG203)
0xBA
Len
0x11
Page
Data
Checksum
Page: The page number to be written, 0x00 – 0x0F
Data: The data to write, 4 bytes.
Response:
0xBD
Len
0x11
Status
Data
Checksum
Status: 0x00: Operation succeed
0x01: No tag
0x05: Write fail
0x06: Unable to read after write
0x08: Address overflow
0xF0: Checksum error
Data: Page data written if operation succeeds, 4 bytes.
4-4-15. Manage Red Led
0xBA
Len
0x40
Code
Checksum
Code: 0 command red led turn off , other red led turn on, 1 byte
Return:
0xBD
Len
0x40
Status
Checksum
Status: 0x00: Operation succeed
0xF0: Checksum error
4-4-16. Get firmware version
0xBA
Len
0xF0
Checksum
Response:
[3]
0xBD
Len
0xF0
Status
Data
Checksum
Status: 0x00: Operation success
0xF0: Checksum error
Data: firmware version.