EasyManua.ls Logo

StrongLink SL025B - Main Features of SL025 B

StrongLink SL025B
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
StrongLink SL025B
http://www.stronglink-rfid.com
3
1. MAIN FEATURES
• Tags supported: Mifare 1k, Mifare 4k, Mifare UltraLight and NFC
NTAG203
• Auto-detecting tag, Built-in antenna
• RS232 interface, baud rate 9,600 ~ 115,200 bps
• 4.4 ~ 12.0VDC power supply
• Work current less than 80mA
• Operating distance: Up to 70mm, depending on tag
• Storage temperature: -40 ºC ~ +85 ºC
• Operating temperature: -25 ºC ~ +70 ºC
• Dimension: 86 × 55 mm
• Two LEDs, green led is auto light when tag in detection range, red led
is controlled by host
• The OUT pin at low level indicates tag in detective range, and high
level indicating tag out
• Support IAP firmware update