Stryker Performance-LOAD - Setup Procedure; Cot Compatibility

SSeettuupp
During setup, unpack the cartons and check all items for proper operation. Make sure that the product works properly
before you place it in service.
Remove all the shipping and packaging materials from the product before use.
The condition of PPeerrffoorrmmaannccee--LLOOAADD is the responsibility of the user. Have a qualified service person use the following list
and the operation guide instructions to check PPeerrffoorrmmaannccee--LLOOAADD functionality.
1. Confirm that the installation checklist is complete (
Installation checklist (page 24)).
2. If the installation checklist was completed by a third-party installer, the end user should repeat the installation checklist.
Do not place PPeerrffoorrmmaannccee--LLOOAADD into service if you cannot complete the installation checklist.
CCoott ccoommppaattiibbiilliittyy
The Stryker Model 6392 PPeerrffoorrmmaannccee--LLOOAADD system is compatible with cots with a PPeerrffoorrmmaannccee--LLOOAADD compatible
option.
WWAARRNNIINNGG
• PPeerrffoorrmmaannccee--LLOOAADD is designed to be compatible with the PPeerrffoorrmmaannccee--PPRROO XT, PPoowweerr--PPRROO XT, and PPoowweerr--PPRROO
IT cots with a PPeerrffoorrmmaannccee--LLOOAADD option. With the mass casualty option, you can use PPeerrffoorrmmaannccee--LLOOAADD with a
standard antler for most X-frame cots, but a rail clamp assembly and antler is required for all cots without a
PPeerrffoorrmmaannccee--LLOOAADD option.
• It is the responsibility of the cot operator to make sure that the cot being used in the Stryker Model 6392 PPeerrffoorrmmaannccee--
LLOOAADD system is a PPeerrffoorrmmaannccee--LLOOAADD compatible cot. Injury may result if a non-compatible cot is used in the Stryker
Model 6392 PPeerrffoorrmmaannccee--LLOOAADD system.
Cots that currently meet these specifications are:
• Model 6086 PPeerrffoorrmmaannccee--PPRROO XT with a PPeerrffoorrmmaannccee--LLOOAADD option (factory installed) or compatibility kit (6086-700-
007)
• Model 6506 PPoowweerr--PPRROO XT with a PPeerrffoorrmmaannccee--LLOOAADD option (factory installed) or compatibility kit (6506-700-002 or
6506-700-014)
• Model 6516 PPoowweerr--PPRROO IT with a PPeerrffoorrmmaannccee--LLOOAADD option (factory installed) or compatibility kit (6516-700-002)
• Model 6500 PPoowweerr--PPRROO XT with a PPeerrffoorrmmaannccee--LLOOAADD compatibility kit (6500-700-065 or 6500-700-066)
6392-009-001 Rev D.3 9 EN