IInnttrroodduuccttiioonn
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
NNoottee
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
PPrroodduucctt ddeessccrriippttiioonn
PPeerrffoorrmmaannccee--LLOOAADD is a manual cot fastener designed to secure compatible ambulance cots into a ground-based
transport vehicle for patient transportation purposes and to allow for the insertion and removal of the compatible ambulance
cots.
When the compatible cot is secured in the transport position, PPeerrffoorrmmaannccee--LLOOAADD can inductively charge compatible
model ambulance cots with an inductive charging option. In the event of loss of charging, PPeerrffoorrmmaannccee--LLOOAADD remains
functional for guiding into, securing within, and removing the cot from the vehicle.
IInnddiiccaattiioonnss ffoorr uussee
PPeerrffoorrmmaannccee--LLOOAADD is intended to guide the loading and unloading of a compatible ambulance cot (wheeled stretcher) to
and from a ground-based transport vehicle and to secure the ambulance cot during transport in a fastened position while
also providing an optional inductive charging platform for charge-compatible ambulance cots.
EExxppeecctteedd sseerrvviiccee lliiffee
The PPeerrffoorrmmaannccee--LLOOAADD cot fastener has a seven year expected service life under normal use conditions and with
appropriate periodic maintenance.
CCoonnttrraaiinnddiiccaattiioonnss
None known.
SSppeecciiffiiccaattiioonnss
Length 70 in. 178 cm
Width 19 in. 48 cm
Height 6 in. 15 cm
Floor plate assembly weight 16.5 lb 7.5 kg
6392-009-001 Rev D.3 5 EN
To Next Page
Loading...