Stryker Physio Control Lifepak CR2 User Manual

Pre-installation Checklist
a. Set up your LIFEPAK CR2 Defibrillator (AED) as
instructed in the Getting Started Guide and verify the
Readiness indicator is flashing.
b. Confirm that the intended location for the AED has a
good connection to the Wi-Fi network.
Test the signal strength of the Wi-Fi network at the
intended AED location using a different Wi-Fi device
such as a smartphone.
c. Identify the Wi-Fi network information you will need to
connect the AED to the network.
NETWORK NAME:
SECURITY KEY:
d. Confirm that you have a PC with internet access and
Windows
®
7 or above operating system. You will need
Administrator rights on the PC.
e. Locate the USB cable included in the shipping box.
FAQs
Q: I need to set up multiple AEDs at locations that have dierent Wi-Fi networks. What should I do?
A: In step c above, identify the network information for each Wi-Fi network.
Q: I want to skip the Wi-Fi setup and only test the cellular connection. How do I do that?
A: Skip steps b through e above, and begin this procedure at step 4.

Stryker Physio Control Lifepak CR2 Specifications

General

Brand	Stryker
Model	Physio Control Lifepak CR2
Category	Medical Equipment
Language	English