IInnttrroodduuccttiioonn
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
NNoottee
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
PPrroodduucctt ddeessccrriippttiioonn
PPrrooFFoorrmm™™ is a 6” thick, non-powered foam support surface for the general patient population. There are articulation cuts
on the mattress core. The mattress cover material options include nylon material or END406 by DDaarrtteexx® fabric. All
configurations of the product include heel slope at the foot end of the support surface. The dimensions of this product are
compatible with SSttrryykkeerr bed frames. See the compatible bed frame list in the specifications section of this manual.
IInntteennddeedd uussee
PPrrooFFoorrmm uses foam to help with pressure redistribution and immersion.
This product is a non-powered support surface that assists in the prevention and treatment of pressure injuries or pressure
ulcers (all stages, Unstageable injury, and Deep Tissue injury). We recommend you implement this product in combination
with clinical evaluation of risk factors and skin assessments made by a healthcare professional.
The standard Model (281505550001, 281505550003, 281505550005, 281505550007, 281505550020) is intended for the
general hospital environment, specifically the acute care healthcare facilities.
The behavioral health Model (281505550009, 281505550010, 281505550011) are intended for use in behavioral care
facilities.
PPrrooFFoorrmm shall be used with a support surface cover at all times. The support surface cover can interact with all external
skin. A top sheet should be used with this product.
The standard general hospital environment models and the behavioral health models are not intended for:
• Patients that exceed the safe working load
• Bariatric patients
• Home health environment setting
• Not a sterile product
• Does not contain a measuring function
SSttrryykkeerr promotes the clinical assessment of each patient and appropriate usage by the operator.
EN 4 2815-009-001 Rev D.1
To Next Page
Loading...
