Stryker SR-94HPC - Background Function Menu Operation

10
RB: RB function
1.Short press
key to choose programmed function group.
2.Short press the programmable key which allocated as RB function, LCD displays
RB:XX.
3.Short press it again or turn channel switch to choose RB group
4.Press [PUSH] key or key to store setting and exit.
HIC: HI-CUT function
1.Short press key to choose programmed function group.
2.Short press the programmable key which allocated as HIC function, LCD displays
HIC:XX.
3.Short press it again or turn channel switch to switch between ON→OFF.
4.Press [PUSH] key or key to store setting and exit.
CDT: CTCSS/DCS encode (optional)
1.Short press
key to choose programmed function group.
2.Repeatedly short press the programmable key which allocated as CDT function , LCD
displays :
CDT:OFF Turn off CTCSS/DCS encode function.
CTC:XX 67.0Hz~250.3Hz, total 38 groups.
DCS:XX D023N~D754N, total 104 groups.
3.After choose code mode, turn channel switch to choose code group.
4.Press [PUSH] key or key to store setting and exit.
XX: The current key not setting function.
How to enter function menu:
1.Long press key to enter SELECT MENU interface.
2.Short press
key, key or turn channel switch to move cursor, to choose menu.
(Note: short press key will fast turn menu page).
3.Press [PUSH] key to enter FUNC MENU .
4.Short press key, key or turn channel switch to move cursor to set for choose
function.
1. BEEP: Beep sound
1.Enter FUNC MENU, choose NO. 1 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.turn channel switch to choose wanted setting.
4.Press [PUSH] key or key to conrm and exit.
7. BACKGROUND FUNCTION MENU OPERATION
Note: This function is available only when install Optional CTCSS board.
CTCSS Board is available for purchase at www.strykerradios.com/store