Stryker SR-94HPC - Channel Function Menu Operation

15
How to enter channel menu:
1.Long press key to enter main MENU interface.
2.Short press
key, key or Turn channel switch to move cursor, to choose menu
group.(Short press
key can fast turn page).
3.Press [PUSH] key enter channel menu .
4.Short press
key, key or Turn channel switch to move cursor to choose wanted
menu setting.(Short press
key can fast turn page).
5.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
6.Turn channel switch to choose wanted setting.
7.Press [PUSH] key or
key to conrm and exit.
9. CHANNEL FUNCTION MENU OPERATION
NO. LCD display Function detail Setting details
1
PD XXX Public channel setting
OFF: Public setting disable.
(The separate channel setting is valid for single
channel only.)
ON: The public setting is valid for all channels.
2
SCAN XXX
Scan add/delete
setting
ADD: Current channel add into scan list.
DEL: Current channel delete from scan list.
When PD is on, the following menu is hiding, when PD is OFF, the following menu will appear.
3
A/FM XXX Mode setting
FM: Turn on FM mode.
AM: Turn on AM mode.
4
NB XXX NB function setting
OFF: Turn off NB function.
ON: Turn on NB function.
5
HIC XXX
HI-CUT function
setting
OFF: Turn off HI-CUT function.
ON: Turn on HI-CUT function.
6
RB XXX RB setting
OFF-5, total 6 groups available.
OFF: Turn off RB function.
7
CDT XXX
CTCSS/DCS encode
setting
Long press [PUSH] key to choose wanted setting:
CTC: 67.0Hz~250.3Hz, total 38 groups.
DCS: D023N~D754N, total 104 groups.
OFF: Turn off CTCSS/DCS encode.
Long press [PUSH] key to conrm and exit.
Note: This is function is optional.
8
BUSY XXX
Busy channel lock
function.
OFF: Turn off busy channel lock function.
ON: Turn on busy channel lock function.
9
BOT XXX Call setting
OFF: Press [PTT] will not transmit DTMF code.
1~16: Press [PTT] to transmit DTMF code.
10
EOT XXX Call setting
OFF: Release [PTT] will not transmit DTMF code.
1~16: Release [PTT] to transmit DTMF code.
11
CALL XXX Call setting
OFF: Press CALL key will not transmit DTMF code.
1~16: Press CALL key to transmit DTMF code.
Note: Note: Channel funciton menu is used to edit the setting for current channel.