Stryker SR-94HPC - Page 22

17
4. PRE-T: Pre-loading time setting
1.Enter DTMF MENU, choose NO. 4 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has 100ms~2500ms total 25 levels
available.
4.Press [PUSH] key or
key to conrm and exit.
5. DELAY: #. * delay time setting
1.Enter DTMF MENU, choose NO. 5 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has 0~1000ms total 4 levels available.
4.Press [PUSH] key or
key to conrm and exit.
6. D-FUN: D function key setting
1.Enter DTMF MENU, choose NO. 6 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose group, This radio has D~16S total 17 levels available.
4.Press [PUSH] key or
key to conrm and exit.
7. DISP: Code display setting
1.Enter DTMF MENU, choose NO. 7 function menu.
2.Press [PUSH] key to enter function setting, the chosen menu value in LCD will turn to
green color.
3.Turn channel switch to choose setting:
ON: When transmitting DTMF code, LCD displays corresponding setting.
OFF: When transmitting DTMF code, LCD not display corresponding setting.
4.Press [PUSH] key or
key to conrm and exit.