Strymon BigSky - Rear Panel; INPUTS; OUTPUTS; EXP

BigSky - User Manual
®
pg 3
POWER: Never
plug into voltage
higher than 9V DC.
Requires at least
300mA of available
current. 9V DC
center negative
polarity.
MIDI: Full
featured MIDI
input and output
supporting CCs,
Program changes,
etc. See MIDI
Specifi cation
section.
INPUTS: High
impedance inputs.
Use LEFT input for
mono.
OUTPUTS: Use
LEFT output for
mono.
CAB FILTER
SWITCH: Set
switch to ON for
a sophisticated
speaker
response curve.
See Cab Filter.
EXP: Connect an
expression pedal. See
EXP Connections
Rear Panel