Version No. 1.0
Page 27 of 51 User Manual STS Safe Series all Equipment 2023 V1.1
Dose Alarm – The Dosimeter will give a continuous broken beep when the dose alarm
threshold is exceeded. This Alarm will continue until acknowledged by pressing the
button.
Final Dose Alarm – The Dosimeter will give a continuous beep when the final dose
alarm threshold is exceeded. This Alarm will continue until acknowledged by pressing the
button.
8.3 Maintenance
The Safe-EPD does not contain any user serviceable parts and as such no repair or
adjustment should be attempted as this will both invalidate the warranty and lead to
potential damage of the circuit.
The batteries are accessed through the panel on the side of the instrument. The Safe-EPD
uses 2 alkaline AAA cells, professional or long life cells are recommended for best
performance. Batteries should be removed when not in use for prolonged periods and
partially discharged cells should never be mixed with new cells.
ENSURE CELLS ARE CORRECTLY FITTED – Observe the polarity markings on the case, the +
sign indicates that the cell should be placed with the positive terminal facing the battery door
aperture.
To Next Page
Loading...